About this item

• PAUTIX 2 IN 1 LED CONTROLLER KIT:Compatible with two types of LED strips including single color temperature LED strips, CCT LED strips. Included in the kit is a controller and half-touch RF remote/dimmer. Freely set the color, brightness you want in different modes(Please read the settings in the manual carefully and choose the correct mode according to the strip light you connected).
• MAXIMUM 12A/288W OUTPUT: Enough to drive a maximum 288W LED strip, no need to worry about damage to the controller caused by low output. Note: Please be sure to check the power of the LED strip before connecting to this controller.
• TOUCH DIMMING:Supports two types strip lights, single color temperature LED strip lights and CCT LED strip lights. The touch dimmer frees you from the tedious operation of multiple buttons, and you can easily slide the dimming panel to set the brightness or color temperature of the strip light.
• SPECIFICATIONS:Input/Output Voltage: DC12-24V. Maximum output: 12A/channel (total maximum output 12A). Working temperature: -10℃~40℃. Communication Mode: RF 2.4GHz. RF remote control distance: 30 meters (99ft).
• AUTO-TRANSMITTING FUNCTION:One controller can transmit the signal of RF remote control to another/multiple controllers within 30 meters. For remote dimming only. Please make sure that the LED strips within 30 meters have a controller, and the remote control distance can be infinite. All controllers should be in the same group.

About this item

• PAUTIX 5 IN 1 WIFI CONTROLLER:Compatible with five types of LED strips including single color temperature LED strip, RGB, CCT, RGBW, RGB+CCT. Freely set the color, brightness you want in different modes(Please read the settings in the manual carefully and choose the correct mode according to the strip light you connected).
• MULTI CONTROLS WITH APP,VOICE OR RF REMOTE:Turn on/off your lights at any time through the smartphone APP. You can even control your lights remotely when the controller is plugged into a 2.4GHz gateway. Support third-party voice control such as Amazon Alexa, Google Assistant (requires access to 2.4GHz WIFI gateway). Works with PAUTIX full touch RF remote control. Please read the connection instructions of the PAUTIX full touch RF remote control to connect to the 5-in-1 controller.
• MULTI FUNCTIONS:16 million RGB colors to choose from. CCT dual color temperature can be adjusted between 2700K-6500K. Brightness adjustable. Group control/multi-zone control. Timer settings. Device sharing.
• SPECIFICATIONS:Input/Output Voltage: 12-24V. Maximum output: 6A/channel (total maximum output 15A). Working temperature: -20℃~60℃. Communication Mode: WiFi 2.4GHz. RF remote control distance: 30 meters (99ft).
• AUTO-TRANSMITTING FUNCTION:One controller can transmit the signal of RF remote control to another/multiple controllers within 30 meters. For remote dimming only. Please make sure that the LED strips within 30 meters have a controller, and the remote control distance can be infinite. All controllers should be in the same group.

About this item

• Support PWM LED Strip: PWM LED strip without smart IC, such as PAUTIX 2-Pin 2000K/2700K/3000K/4000K/5000K/6000K/6500K COB strip, 3-Pin CCT 2700K-6500K tunable COB LED strip, 4-Pin RGB COB LED Light strip, 5-Pin RGBW COB LED strip, 6-Pin RGB+CCT COB LED strip.
• Addressable SPI LED Strip with IC: It Supports Addressable IC Chip LED Strip.SPI TTL IC Chip LED strip .3pin(V+ Data GND) or 4pin(V+ Data Backup GND) .For example WS2811 WS2812B WS2813 WS2814 WS2815 SK6812 LB1934 IC chipW etc single RGB color,RGB, ,RGBCCT addressable LED strip. Support PAUTIX RGBIC COB LED Strip (ASIN: B0BN5N3R82).
• Mini LED Strip Light Controller: It Supports SPI+PWM LED Strip at the same time.For example you could controller WS2812B IC RGB LED strip + FCOB 3000K single color no IC strip or WS2812B IC RGB LED strip + FCOB CCT no IC strip, and is applicable to multiple light strips. A led controller can meet your various needs.
• Music Method: Music lighting effects. 3 kinds of collection methods, mobile phone microphone, player streaming, Built-in high-sensitivity microphone, The light strip beats in real time with the rhythm of music.
• Color Calibration:When the app color is inconsistent with the color of the LED strip, the color can be calibrated to make it consistent.
• DIY Function: You can make your own lighting effects (custom color, dynamic mode, speed, sensitivity) for the LED strip. Three APP operation interfaces, static mode, dynamic mode, music mode.
• Timing Function: You could set up to 5 timers. With memory function in case of power-down.
• Working Voltage: DC5-24V. Output 6A per channel, total 12A. 5.5mmx2.1mm DC power jack.

About this item

• Support PWM LED Strip. PWM LED strip which has no IC chip,fox example COB 5630 5730 5050 2835 3528 2pin(V+ V-) 3pin CCT(V+ CW WW) 4pin RGB(V+ R G B) 5pin RGBW(V+ R G B W) 6pin RGB+CCT(V+ R G B CW WW).Monochrome Light and CCT light have no function of DIY light effect.
• Support Addressable IC Chip LED Strip and Matrix.SPI TTL IC Chip LED strip and Matrix.WS2812B LED Matrix, 8X8, 8x16, 8x32, 16x16, 32x32 etc, MAX1200pixel. 3pin(V+ Data GND) or 4pin(V+ Data Backup GND). For example WS2811 WS2812B WS2813 WS2814 WS2815 SK6812 LB1934 IC chip etc single color ,CCT ,RGB ,RGBW,RGB+CCT addressable LED strip.Can not support SK9822 WS2801 etc Data+Clock LED strip.Monochrome Light and CCT light have no function of DIY light effect
• Support SPI+PWM LED Strip at the same time. Compatible with all PAUTIX COB LED strip lights! For example you can controller PAUTIX RGB smart IC COB LED strip + COB 3000K single color no IC strip or PAUTIX RGB smart IC COB LED strip + CCT COB no IC strip.
• Newly Upgraded Music Effect Modes. Light strip music effect: You can configure multiple music effects on the same light strip according to their needs, and each section of the light bar can be selected with different music effects, different points, and can be set to correspond to the low, medium and high audio range.
• Light screen spectrum effect: You can flexibly configure the size and alignment of the rectangular light screen, and can set the music spectrum of the fall point and the parameters of the sound column, such as color, saturation and direction, etc., which can achieve a more unique music spectrum effect.
• Color calibration. When the app color is inconsistent with the color of the LED strip, the color can be calibrated to make it consistent.
• Timing function.You can set up to 5 timers.With memory function in case of power-down.Support Power On/Off Effect Setting, Fun Switch Setting, Default Switching State Setting.

About this item

• Compatibility: Compatible with PAUTIX CCT COB LED strips and most 4-pin plug CCT LED strip lights. Input voltage: DC5-24V. PWM single channel maximum output current: 2A. Total support for maximum output current 4A (PAUTIX 3-pin CCT light strip). Utilizes a dual-mode master control chip for efficient Bluetooth networking, supporting Bluetooth, Wi-Fi and remote cloud connections.
• Three Control Methods: Support smartphone APP control, 2.4G remote control and one-button switch of the control box. You can choose any brightness and any color temperature between 2700K and 6500K through the APP. The remote control with built-in 17 brightness levels has 14 preset color temperatures, which can be switched at will by pressing the two buttons "Color Temperature±". The RF remote control means you can control your strip lights from any angle within 30m/99ft of an open area!
• Voice Activation: Compatible with third-party voice devices such as Alexa/Google Assistant. Search "BanlanX" in Alexa and add the skill, then you can voice to wake Alexa to turn the lights on/off for you. Note: There are detailed connection steps in the BanlanX app. Click "Me" on the APP homepage to find "Third-Party Voice Services".
• Support Group Control: You can create a group in the mobile APP and add multiple controllers to the group for simultaneous control.Support one-to-many and many-to-one control.You can use multiple remotes (up to 5) to control one controller at the same time, and even use one remote to control multiple controllers at the same time (Controllers are no limit as long as all are within 99ft/30m). NOTE: You can control each strip individually by simply pairing each controller with its remote.
• Multifunctional: Built-in music mode and multiple dynamic modes. Supports channel order (color temperature) calibration. Search "BanlanX" in the app store to find the APP or scan the QR code on the controller box. The timer function allows you to set the on/off of the light strip, no need to turn it off manually! The memory function allows the light strip to retain the settings when it was turned off and you no longer have to worry about repeating the settings!
• Packaging & After-sales: 1 × 2.4G remote control; 1 × controller box; 1 × user manual. PAUTIX provides every customer fast customer service response! You can get in touch with PAUTIX at any time if you encounter any difficulties in the process of using the product and PAUTIX will provide professional solutions.

About this item

• Compatibility: Compatible with PAUTIX CCT COB LED strips and most 4-pin plug CCT LED strip lights. Input voltage: DC5-24V. PWM single channel maximum output current: 2A. Total support for maximum output current 4A (PAUTIX 3-pin CCT light strip).
• Three Control Methods: Support smartphone APP control, 2.4G remote control and one-button switch of the control box. You can choose any brightness and any color temperature between 2700K and 6500K through the APP. The remote control with built-in 17 brightness levels has 14 preset color temperatures, which can be switched at will by pressing the two buttons "CCT+" and "CCT-". The RF remote control means you can control your strip lights from any angle within 30m/99ft of an open area!
• Support Group Control: You can create a group in the mobile APP and add multiple controllers to the group for simultaneous control.Support one-to-many and many-to-one control.You can use multiple remotes (up to 5) to control one controller at the same time, and even use one remote to control multiple controllers at the same time (Controllers are no limit as long as all are within 99ft/30m). NOTE: You can control each strip individually by simply pairing each controller with its remote.
• Multifunctional: Built-in music mode and multiple dynamic modes. Supports channel order (color temperature) calibration. Search "BanlanX" in the app store to find the APP or scan the QR code on the controller box. The timer function allows you to set the on/off of the light strip, no need to turn it off manually! The memory function allows the light strip to retain the settings when it was turned off and you no longer have to worry about repeating the settings!
• Packaging & After-sales: 1 × 2.4G remote control; 1 × controller box; 1 × user manual. PAUTIX provides every customer fast customer service response! You can get in touch with PAUTIX at any time if you encounter any difficulties in the process of using the product and PAUTIX will provide professional solutions.

About this item

• 【Exclusive NEW Design】NEW Design RF Remote Controller ONLY for 5-24V PAUTIX CCT tunable COB led strip lights,17-Key Remote and controller(receiver) for daily use.Anti slip buckle design, connection is not easy to loose
• 【RF Remote Dimmer】 8-Level brightness dimmer(0-100%),8 dynamic modes,8-level speed adjustment,remote distance is 49ft/15M at open area,1 to 1 pairing or 1 to multi pairing,ONLY use for PAUTIX CCT tunable COB led strip lights
• 【Multi-directional】RF Remote is multi-directional,you don't need to pointed directly at the receiver like IR remote,you can control your led strip at any angle（3V CR2025 battery is included）
• 【Memory/Timer Function】The PAUTIX RF remote dimmer will keep the last time setting memory when you switch on the led lights again.With the timer function,you can set the time(0.5H/1H/3H) to delay the shutdown
• 【Compatibility】ONLY for PAUTIX CCT tunable COB LED String Lights(DC 5-24V),Max Current: 6A