About this item

• HIGHLIGHTS&GOOD QUALITY: Made of hight-strand count(17 Strands) oxygen free copper 22 AWG conductors and high quality PVC, good conductivity, high mechanical strengthfeatures, flame retardant, anti-aging, acid and alkali resistance and dampproof.
• APPLICATION: It is widely used for various DC electrical hookups, low voltage cables, 12V DC, 24V DC, low-loss in-home. For all single color LED strip light, low voltage single color led strip, light bulb, lamp, electronic, electrical appliance and equipment, transformer, lamps,CB Radios and motor led wire connection and other low voltage products connection.
• WORK WELL&EASY TO USE: It's easy to strip and cut into any length based on needs. Wire comes wrapped around a hard plastic spool that makes dispensing convenient. 2 jacket colors make for quick and easy to distinguish the polarity & numbered markings for accuracy.
• PERFECT PERFORMANCE: 99.95% OXYGEN FREE COPPER wires, not copper clad aluminum. OFC provides maximum conductivity, durability and antioxidation to ensure the highest performance and reliability of the products. The jacket material is flexible and environmental friendly PVC, which can be twisted and extended it freely as you like.
• ITEM INCLUDES: 65.6ft/spool (65.5FT Red & 65.5FT Black), actual length is 20m, stranding structure makes it flexible and easy to install.

About this item

• 【Compatible Lights】This installation accessories set is ONLY compatible with 8mm width COB LED Strip lights(Not applicable to 10 mm board width and CCT Tunable COB LED Strip Lights).The strip to wire transparent connector allows you to easily connect a COB strip to another COB strip with wire without soldering
• 【Upgraded Version】Unlike previous corner connectors, the new version of the L-shaped/corner connector has no gaps. The two light strips will be close together to form a beam of light when you use this connector. And the thinner design makes it easier to place it in the channel
• 【Solderless & Gapless Connectors】Using this COB LED strip connector kit you can extend your strip light's length to be longer, eliminating the issue of limited space. These accessories let you extend and connect light strips, the straight connectors(L-Shaped) in the kit let you achieve a corner connection
• 【Easy to Use】COB connector kit with 8 gapless transparent L-shaped/corner connectors and 2 gapless transparent connectors,simple to install and no welding needed.This cob connector kit lets you DIY for a safe and easy job that will save you time and money.The advantage of the upgraded package is that it can be reset repeatedly and the installation is more convenient
• 【Stable Connection】Stable connection for durable daily use.IMPORTANT NOTE:Before pressing the connection, please check whether the positive and negative poles of the light strip are consistent with the other end

About this item

• 【Compatible Lights】This installation accessories set is ONLY compatible with 10mm width 3-pin CCT COB LED Strip lights(Not applicable to 8mm/5mm board width and RGB COB LED Strip Lights).The transparent middle connector will not block the light.ONLY compatible with 10mm 3-pin PAUTIX CCT COB strip lights, other sizes are not applicable
• 【Kit Includes】4pcs Dual End Extension Connectors,2pcs Strip to DC Plug Extension Wire,4pcs Gapless Connectors
• 【Solderless Extendable Connectors】Using this CCT COB LED strip extension kit you can extend your strip light's length to the power supply or connector, eliminating the issue of limited space. These accessories let you extend and connect light strips, extend the connection between the strip light and controller/power supply, and let you achieve a corner connection
• 【3 Types of Mounting Accessories Included】4pcs of transparent gapless solderless connectors,4pcs of Dual End jumpers with 5.5in/14cm 22AWG UL-Listed extension wire,2pcs strip to DC female plug connectors with 5.5in/14cm 22AWG UL-Listed extension wire(Transparent connection ends on each lead are removable and individually used as transparent gapless strip to wire connectors)
• 【Easy to Use】UPGRADED version kit,simple to install and no welding needed, this CCT COB connector kit lets you DIY for a safe and easy job that will save you time and money.The advantage of the upgraded package is that it can be reset repeatedly and the installation is more convenient
• 【Stable Connection】Stable connection for durable daily use.IMPORTANT NOTE:Before pressing the connection, please check whether the positive and negative poles of the light strip are consistent with the other end

About this item

• 【Compatible Lights】This installation accessories set is ONLY compatible with 10mm width COB LED Strip lights(Not applicable to 8 mm/5mm COB Strip).The transparent gapless connector will not block the light.Only compatible with 10mm wide COB strips, other sizes are not applicable
• 【Kit includes】4pcs Dual End Extension Connectors,2pcs Strip to DC Plug Extension Wire,4pcs Gapless Connectors
• 【Solderless Extendable Connectors】Using this cob led strip extension kit you can extend your strip light's length to the power supply or connector, eliminating the issue of limited space. These accessories let you extend and connect light strips, extend the connection between the strip light and controller/power supply, and let you achieve a corner connection
• 【3 Types of Mounting Accessories Included】4pcs of transparent gapless middle connectors,3pcs of Dual End jumpers with 5.5in/14cm 22AWG UL-Listed extension wire,2pc of Single End to 4 Pins Plug with 5.5in/14cm 22AWG UL-Listed extension wire
• 【Easy to Use】UPGRADED version kit,simple to install and no welding needed, this cob connector kit lets you DIY for a safe and easy job that will save you time and money.The advantage of the upgraded package is that it can be reset repeatedly and the installation is more convenient（The transparent connectors on the 4-pin wires are removable and used individually as connectors）
• 【Stable Connection】Stable connection for durable daily use.IMPORTANT NOTE:Before pressing the connection, please check whether the positive and negative poles of the light strip are consistent with the other end

About this item

• 【Compatible】This mounting kit is only suitable for PAUTIX 12mm 3-pin RGB Smart IC COB LED strip lights (not compatible with 3mm/5mm/8mm/10mm and other COB LED strip lights).
• 【Quick Connection】You can easily and quickly connect your PAUTIX RGB Smart IC COB LED strip lights using these connectors. No need to solder means you no longer have to worry about soldering problems, perfectly avoiding problems when soldering! Easy to install, this connector kit makes DIY safe and easy, saving you time and money.
• 【Stable Connection】Stable connection, durable. Important Note: The white wire on the connector corresponds to the negative (GND) wire on the strip, and the red wire corresponds to the positive (+DC24V) wire on the strip. Yellow corresponds to the signal line (DO/DI/DAT) on the light strip. The yellow signal wire does not need to be wired to power when you inject voltage into the strip. If installed incorrectly, the strip will not light properly or will only display white!
• 【5 Types of Connectors】Contains 4pcs transparent gapless connectors, 4pcs transparent strip to wire connectors, 3pcs strip to wire extension connectors (with 3 Pin 20cm 20AWG Wires), 3pcs dual-end extension connectors (with 3 pin 20cm 20AWG wire), 3pcs strip to male plug connectors. Various types of 12mm 3-pin RGBIC COB connectors meet your various connection needs!
• 【Installation and after-sales service】PAUTIX provides fast customer service response! Please feel free to contact PAUTIX if you need any help on installation. Note that you have to press the copper tabs above the connector to be level with the surface of the connector when you install the connectors, otherwise the strip light will flicker or just show white color.

About this item

• 【Compatible】This mounting kit is only suitable for PAUTIX 12mm 5-pin RGBW COB LED strip lights (not compatible with 3mm/5mm/8mm/10mm and other COB LED strip lights).
• 【Quick Connection】You can easily and quickly connect your PAUTIX RGBW COB LED strip lights using these connectors. No need to solder means you no longer have to worry about soldering problems, perfectly avoiding problems when soldering! Easy to install, this connector kit makes DIY safe and easy, saving you time and money.
• 【Stable Connection】Stable connection, durable.IMPORTANT NOTE: Each contact point on the connector needs to be pressed to the same level as the connector so that the contact point makes better contact with the strip light. If flickering occurs or individual colors cannot light up normally, please check the contact points at the connection.
• 【5 Types of Connectors】Contains 4pcs transparent gapless connectors, 8pcs transparent strip to wire connectors, 2pcs strip to wire extension connectors (with 5 Pin 15cm 22AWG Wires), 2pcs dual-end extension connectors (with 5 pin 15cm 22AWG wire), 4pcs L-shaped/corner connectors. Various types of 12mm 5-pin RGBW COB connectors meet your various connection needs!
• 【Installation and after-sales service】PAUTIX provides fast customer service response! Please feel free to contact PAUTIX if you need any help on installation. Note that you have to press the copper tabs above the connector to be level with the surface of the connector when you install the connectors, otherwise the strip light will flicker.

About this item

• 【Compatible】This mounting kit is only suitable for PAUTIX 12mm 6-pin RGB+CCT 2700K-6500K COB LED strip lights (not compatible with 3mm/5mm/8mm/10mm and other COB LED strip lights).
• 【Quick Connection】You can easily and quickly connect your PAUTIX RGB+CCT COB LED strip lights using these connectors. No need to solder means you no longer have to worry about soldering problems, perfectly avoiding problems when soldering! Easy to install, this connector kit makes DIY safe and easy, saving you time and money.
• 【Stable Connection】Stable connection, durable.IMPORTANT NOTE: Each contact point on the connector needs to be pressed to the same level as the connector so that the contact point makes better contact with the strip light. If flickering occurs or individual colors cannot light up normally, please check the contact points at the connection.
• 【4 Types of Connectors】Contains 8pcs transparent gapless connectors, 8pcs transparent strip to wire connectors, 4pcs strip to wire extension connectors (with 6 Pin 15cm 22AWG Wires), 4pcs L-shaped/corner connectors. Various types of 12mm 6-pin RGB+CCT COB connectors meet your various connection needs!
• 【Installation and after-sales service】PAUTIX provides fast customer service response! Please feel free to contact PAUTIX if you need any help on installation. Note that you have to press the copper tabs above the connector to be level with the surface of the connector when you install the connectors, otherwise the strip light will flicker.

About this item

• 【Compatible】This mounting kit is only suitable for PAUTIX 10mm 3-pin IP20/30 CCT COB LED strip lights (not compatible with 3mm/5mm/8mm/12mm and other COB LED strip lights).
• 【Quick Connection】You can easily and quickly connect your PAUTIX 10mm CCT COB LED strip lights using these connectors. No need to solder means you no longer have to worry about soldering problems, perfectly avoiding problems when soldering! Easy to install, this connector kit makes DIY safe and easy, saving you time and money.
• 【 Reusable & Stable Connection】Stable and durable connection. Unlike traditional single-use connectors, these upgraded connectors are reusable. You can detach the connector from the CCT strip if you are no longer using it. Important reminder: Please be sure to align the contact points in the connector with the metal copper pieces on the CCT strip light and then click the lock, otherwise the light strip may flash or fail to light up due to poor contact.
• 【Corner Connection】The L-shaped connector designed based on PAUTIX 10mm IP20/30 CCT COB LED strip light can easily solve the problem of corner connection! Each L-shaped connector can also be split into two transparent gapless strip-to-strip connectors to easily connect two sections of CCT COB strip lights! 12pcs L-shaped connectors can be disassembled to obtain 24pcs gapless connectors.
• 【Package and after-sales service】Package includes 12pcs L-shaped connectors. PAUTIX provides fast customer service response! Please feel free to contact PAUTIX if you need any help on installation.

About this item

• Premium Durable Design: 13FT 2pack(2 X 6.56ft) power extension cable is 20AWG high precision low impedance line,10000+ bend lifespan,make power cables more durable and tangle.
• Plug Size of Female & Male: Outer diameter 5.5mm x inner diameter 2.1mm power plug ,Male to Female connectors.
• Suitable Device: This power extension cable only available for power supplies and equipment with connector size of 5.5x2.1mm. Please check that your power supply and equipment are in compliance Suitable for Security Camera, LED lights, printers, routers, cars, sensors and so on.
• Wide Compatible: Compatible with 24V/12V or lower DC equipment, such as 5V / 9V / 12V / 15V / 24V, etc.
• Warranty: You can contact PAUTIX at any time if there is any problem with the product.

About this item

• Plug Diameter: Inner 2.1mm, 5.5mm outer(Adapt to 5-24V power supply)
• 1 to 2: PAUTIX Y Shape DC Power Adapter Cable Pigtail splits 1 power signal into 2
• Cable Length：15.8in/40cm(longer design than others)
• Color : White
• Max Current: 6A (others are 5A or less)